Construction bricks

laWall

TEXTURE: Relatively new, with some slightly irregular surfaces. Mortar between tiles is quite even.

ATTENTION!!! This type of sheet must be transported flat, so shipping costs vary considerably depending on the quantity and place of delivery. If you are interested, send us an email with the sheets quantity that you need and we will calculate the exact shipping cost.

DIMENSIONS:

Usable area* 1,23 M2

Full sheet size: 1,51 x 0,93cm

((This is the size of sheet that we will deliver to you)

To calculate how many plates you need, go to “prices and budget”.

We cut the left outline of the sheet, so that you can easily join the panels together. The right border cut (in pink) is straight, in order to make the assembly easier.

Sheet width
Keep in mind the following while calculating the square meter that you will need:
If you want to use just one sheet, your usable width is 131 cm.
If you want to assemble more than one sheet, the usable width is 137 cm.

When making your plates, we can gain or lose a few millimeters, so we recommend that you do not adjust too much when placing your order.

Product stock

Our Construction bricks are in stock in order to offer a fast delivery.

The cost per sheet is 34,4€ (27,9€ m2).

Our delivery rates for any quantity of our bricks in stock are the following:

In case that your order include different products, such as bricks and tiles, for instance, we will offer you the best possible shipping rate.

Deliver, finish and installation

CUTTING THE SHEETS
We will deliver all the sheets cut on one side, so that it is very easy for you to join them together.

MATT FINISH
Our bricks finish is MATT. In case that you wish a deeper matt finish, you can apply a solvent-based varnish (don´t forget to test it in a small piece before proceeding. Some solvents may damage the printed image). 

This product is coated with a water-based polyurethane varnish. Please note that this varnish has a low resistance to abrassion. We apply varnish coating manually. Some sheet parts can show a brightness that may need to be rectified during the installation.

Please inform us in case that you wish to apply your own varnish to the sheets once you´ve finished the installation. We may apply a discount to your order.

SEE THE “INSTALLATION” SECTION